GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual page 688

Section 8 — Exporting/Project Output
688
Note If adding files to the project results in exceeding the capacity of the disc
media - as indicated in the Status Bar - the encoding bit rate is automatically
adjusted on all files to allow them to fit on the selected media. If you wish to
increase the encoding bit rate, you will need to select higher-capacity media
by clicking the Media button.
4. If you wish to change or view the encoding parameters of any title, click
the button in the appropriate Title tab.
Setting
The Encode Parameters dialog shown in
Figure 842. Encode Parameters
Note In order to change the Video or Audio encoding parameters, the "Auto" set-
tings must be de-selected as shown in
5. Make any desired changes to the video an audio encoding parameters
and click the button.
OK
6. If more than one title is included in the project, click the
you wish to remove a title from the project or the
to reposition a title within the project.
7. Click the "Style" tab to select the menu style for the project.
The Select Style dialog shown in
Figure 842 appears.
Figure 842.
Up
Figure 843 appears.
EDIUS — User Reference Guide
button if
Delete
and buttons
Down