Playback With Shuttle/Slider Controls - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 5 — Timeline Operations

Playback with Shuttle/Slider Controls

434
Note This creates a temporary playback buffer after which playback restarts. The
playback buffer is managed by the RT Buffer setting in the System Settings
for the appropriate hardware device. See Appendix A-Hardware Settings for
more information.
• Render selected clips or all of the Timeline. See Rendering Operations
on page 441.
• Press the [ key to move the Timeline cursor to the beginning of the
HOME]
Timeline.
• Press the [ key to move the Timeline cursor to the end of the Time-
END]
line.
• Press [ ]+[ ] to move backward 10 frames.
SHIFT
• Press [ ]+[ ] to move forward 10 frames.
SHIFT
The Recorder shuttle and slider are illustrated in
playback controls as explained below.
Figure 486. Recorder Shuttle and Slider
Shuttle
• There are 21 speed levels from 1/20x to 16x in the forward and reverse
directions.
• Drag the shuttle to the right to play the clip in the normal (forward)
direction. The further to the right the shuttle is dragged, the faster the
playback speed.
Note Pressing [CTRL]+[L] on the keyboard will also fast forward the shuttle. Each
press of these keys will move to the next speed step.
• Drag the shuttle to the left to play the clip in the reverse direction. The
further to the left the shuttle is dragged, the faster the playback speed.
Note Pressing [CTRL]+[J] on the keyboard will also rewind the shuttle. Each press
of these keys will move to the next speed step.
• Release the drag to return the shuttle to the center (pause) position.
Figure 486. Use these
EDIUS — User Reference Guide