GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual page 678

Section 8 — Exporting/Project Output
678
To add a sequence to the batch list, execute the following steps:
1. Set the In and Out points, if desired, for the range to be exported.
Note If no In and Out points are set, the entire sequence will be exported when the
batch list is executed.
2. Click the button in the Recorder as shown in
Export
Figure 828. Export Button Menu
The Export menu appears.
3. Select "Print to File" from the menu.
The Select Exporter Plug-In dialog in appears.
4. Select an Exporter and click the
Note Some Exporters do not support batch export. If one of these Exporters is
selected, the Add to Batch List button is disabled.
A File Save dialog appears with the name of the selected Exporter.
5. Navigate to the folder in which you wish to save the batch export and
enter a file name. See
Note Depending upon the Exporter selected, some export settings may appear in
the File Save dialog as shown in
Add to Batch List
Figure 829.
Figure 829.
EDIUS — User Reference Guide
Figure 815.
button.