Track Transitions - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 6 — Effects and Titles

Track Transitions

516
Figure 588. Transition Indicator Between Clips
4. Double-click the transition indicator (on an area other than the In/Out
points or cut points) to display the transition settings dialog. The
transition configuration dialog for the Dissolve transition effect is
illustrated in Figure
effect.
Note If the transition indicator is small and there is no area to double-click to open
the settings dialog, right-click the transition indicator and select "Settings"
from the menu or double-click the transition effect in the Information Palette.
Figure 589. Dissolve Transition Settings Dialog
5. Make any desired changes to the transition effect settings and click the
button to close the dialog.
OK
Transitions may be applied in the mixer area at the point where clips tran-
sition on a track. To add a track transition, do the following:
1. Select "Transitions" in the Effect Tree of the Effect Palette.
589. The Settings dialog differs for each transition
EDIUS — User Reference Guide