Consolidate Project - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 1 — Getting Started

Consolidate Project

68
Note Rendered files cannot be copied if the project to be imported has a frame size,
aspect ratio or overscan size that differs from the current project.
Enter the desired folder name to which the files should be copied. This
folder will be created under the current project folder.
3. Click the button, to import the project/sequence using the
OK
designated import settings.
Project consolidation removes unused clips or portions of clips from the
project folder. Consolidation is also useful in creating a smaller copy of the
project file to, for example, transfer the project to removable media for
archival.
Note See File Formats Supported In Trimming Operations
Appendix C-Input/Output Formats for more information on file format
support in trimming and consolidation operations.
To consolidate a project, do the following:
1. Click the list button [ ] of the
"Consolidate Project" from the menu as illustrated in
Note An alternative method is to select File>Consolidate Project from the preview
window menu bar.
Figure 53. Timeline Save Project Menu - Consolidate Project
Note If the message "Not enough disk space for consolidating" appears, change
the project saving destination to a drive with more available space.
The Consolidate Project dialog appears as shown in
on page 770
button and select
Save Project
Figure 54
EDIUS — User Reference Guide
of
Figure 53.