Audio Cross Fades - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 6 — Effects and Titles

Audio Cross Fades

518
Audio cross fades may be applied at the point at which the audio is transi-
tioning from one clip to another.
1. Select "AudioCrossFades" in the Effect Tree of the Effect Palette.
2. Select the desired cross fade type from the effect view (see
or the Effect>AudioCrossFades tree if the effect view is hidden.
Figure 592. Effect Palette - Transitions Effect View
3. Drag and drop the selected cross fade effect at the point where the
audio clips touch each other on the Timeline.
Note By default, the default video transition is not added automatically when an
audio cross fade is added between clips. If you wish to enable the automatic
addition of the video transition when a cross fade is added, see Insert Default
Transition in Cross Fade
The cross fade indicator is added between the clips as illustrated in
Figure 593.
on page 128 in Timeline Settings.
EDIUS — User Reference Guide
Figure 587)