3D Picture In Picture - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

3D Picture in Picture

EDIUS — User Reference Guide
6. Select the desired speed setting from the menu for the selected
position/time point on the chart.
Note A sharper angle on the black line increases the motion speed. Once a point
has been set on the chart, its position and angle can be changed by dragging
it to a new location on the position/time axes.
Figure 616 shows a sample motion keyframe chart for the overlay window.
In this example, the window motion accelerates to the first keyframe then
remains constant through the second and third keyframes after which it
again accelerates to the end point.
Figure 616. Picture in Picture Motion Keyframe Chart
For a more detailed discussion of 2D Picture in Picture effects and a proce-
dure for configuring a keyframeable 2D Picture in Picture effect, see
Appendix B-Special Procedures.
A picture in picture effect is where one video is overlaid over another with
one serving as the background video while the other is confined to a certain
area of the screen over the background as shown in
To create picture in picture effect, follow these steps:
1. Select the "Keyers" tree from the Effect Palette as shown in
2. Drag and drop the 3D Picture in Picture effect to the Mixer area of the
clip that will be in the overlay window.
Note If the Effect view is hidden, the keyer effects will be listed under the Keyers
tree in the Effect Palette.
Creating Video Composites
Figure 603 on page 524.
Figure 617.
533