Section 2 — Application and Plug-In Settings
194
Figure 172. Jog Device Select
To specify a jog device for use with EDIUS, do the following:
1. Select the device from the Device drop-down list. Choices are EDIUS-
JC1p and MKB-88. S
2. Select the port on which the device is connected to the EDIUS computer.
3. Click the
Reconnect
Note
If the device is not found, the error dialog in
device and the port connection to make sure it is correct.
Figure 173. Jog/Fader Reconnect Failed
button to detect and connect to the device.
EDIUS — User Reference Guide
Figure 167
appears. Check the