Section 1 — Getting Started
54
To create a new project from the current project, do the following:
1. Perform any of the three actions listed above to initiate the creation of a
new project.
After performing any of these actions, a dialog prompting to save the
current project file appears. See
Figure 34. Save Current Project Dialog
2. Click
to save the current project.
Yes
The Project settings (simple settings) dialog box shown in
appears.
Figure 35. Project Settings (Simple Settings) Dialog
3. Enter a name for the project in the Project name field.
4. Select the desired project preset and click the
Note
If you wish to create a new project preset, click the New Preset button and
follow the instructions to Create a Project Preset
Figure
34.
button.
OK
on page
EDIUS — User Reference Guide
Figure 35
45.