Enabling/Disabling Effects - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Enabling/Disabling Effects

EDIUS — User Reference Guide
The Information Palette displays a list of applied effects for the selected
clip. For more information see Information Palette
To adjust an effect, do any of the following:
• Select the effect name in the effects list of the Information Palette and
click the button.
Settings
The configuration dialog for the effect appears.
• Double-click the effect name in the effects list of the Information Palette.
• Drag and drop the effect name in the effects list to the
the Information Palette.
• Right-click the effect name in the effects list of the Information Palette
and select "Open Setup Dialog" from the menu.
Adjust the effect as desired. For more information, see the section on
applying each effect type.
Note Effects can be modified and saved under a different name as user preset
effects. See Customizing the Effect Palette
To enable or disable effects that have been applied to clips, do one of the fol-
lowing after selecting the desired clip on the Timeline:
• Click the checkbox of the desired effect in the effects list of the Informa-
tion Palette (see Figure
enabled. If there is no check mark, the effect is disabled.
Figure 673. Information Palette Effect Enable/Disable
• Right-click the effect name in the effect list of the Information Palette
and select "Enable/Disable" from the menu.
• Select an effect name in the effect list of the Information Palette and
press the [ ]+[
CTRL
673). If the check mark is present, the effect is
] keys on the keyboard.
F
Effect Operations
on page 566.
Settings
on page 577 for more information.
button of
569