Table of Contents
Advertisement
Con guring the network
2. Proceed as follows:
3. Con gure the settings for the network as follows:
4. Click
5. If you added a network, it appears in the
Related Links
About the corporate LAN
Adding a group
1. In the
2. Right-click the group and select
3. Enter the desired name for the group.
Adding a device to the system description
Prerequisites for this task are as follows:
36
Aurora Edit Installation Guide
The networks under that node are displayed in the list view.
To add a network under the currently selected node, in the tree view right-click
the node and select
Add Network
The Network Settings dialog box opens.
Type Select Ethernet
Usage Select Control
Redundancy Select None
Name Enter a name to identify the network in the system description
Exclude from Host Files Select the checkbox
Unmanaged Select this option, then select DNS and select the checkbox for
IP Address Allocation via DHCP.
Base IP Address Do not con gure
Number of IP Addresses Do not con gure
Subnet Mask Do not con gure
DNS Servers Servers providing DNS for name resolution. These DNS server
can be for both managed and unmanaged networks.
Default Interface Name Suf x The suf x added to the end of host names to
identify interfaces on this network.
to save settings and close.
OK
view at the bottom of the list.
on page 34
Network Configuration | Networks
.
Add Group
The group appears in the tree view.
.
Network Configuration | Networks
tree view, right-click a site node and select
.
Rename
tree
4 October 2010
Advertisement
Table of Contents
