Audio Breakaway - All Audio Groups From A Single Source - GRASS VALLEY MAESTRO 1.5 - RELEASE NOTES Release Note

Audio Breakaway - All Audio Groups From a Single Source

Maestro — Release Notes
In order to execute an audio breakaway of all audio groups from a single
background bus source, the operator performs the following steps:
1. Depress and hold the Audio Source Control button. While the button is
depressed, it will remain illuminated. The Audio Source Control button
must remain depressed throughout the breakaway operation.
Note On the GUI control panel, the Audio Source Control button will toggle on and
off with each touch since it cannot be held down.
If the error screen in
Control button, select a valid monitor point (Program, Preset or Aux) in
the Audio Control Home screen and depress and hold the Audio
Source Control Button again.
Note Releasing the Audio Source Control button at any time during the Audio
Breakaway process will result in all operations to that point in the process
being cancelled and the Audio Source Control button illumination will be
extinguished.
With the Audio Source Control button depressed, the Audio Control
panel screen will display either
or Figure 13 Multi-Source Audio Breakaway - Source Selection
screen that is initially displayed will be the one last used in the most
recent audio breakaway operation.
2. To breakaway all audio groups for a particular background bus (PGM,
PST, AUX), press the desired source button on the appropriate bus. The
source from which the audio is broken away will tally low (dim
illumination). To perform a breakaway of selected groups from one or
more sources, proceed to
From Multiple Sources.
3. Release the Audio Source Control button. The Audio Source Control
button illumination will extinguish and the breakaway will be active.
If a breakaway is active on the PGM, PST or AUX bus, selecting a different
source on the same bus (without the Video our Audio Source Control
button depressed) will result in the de-selection of all breakaways on that
bus and the selection of the "as configured" desired source. If a breakaway
is desired with the new source, the steps above must be repeated.
Figure 11 appears, release the Audio Source
Figure 12 Audio Breakaway Status Screen
Audio Breakaway - One Or More Audio Groups
Audio/Video Breakaway
Screen. The
25