Setting Credentials For A Specific Device - GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual

Con guring the network
1. Add a placeholder device for an Aurora Edit LD workstation.
2. If necessary, set the placeholder device's credentials so that SiteCon g will use
3. Select the placeholder device.
4. In the interfaces list view, right-click an interface and select
5. Con gure the settings for the interface as follows:
6. Con gure for the device name as follows:
7. Click
8. From the control point PC, ping the Aurora Edit LD workstation to verify
Related Links
Installing and con guring SiteCon g support for Aurora Edit LD
About software deployment on the corporate LAN

Setting credentials for a specific device

For Aurora Edit LD, override global credentials so that SiteCon g has access to the
Aurora Edit LD workstation for software deployment.
1. In the tree view, right-click a device and select
54 Aurora Edit Installation Guide
the correct credentials when it communicates with the device.
The Unmanaged Network Interface Details dialog box opens.
Network If using DHCP or external hosts le, select the unmanaged network
that you con gured earlier in this procedure.
IP Address Make no selection.
DNS Suf x For communication on some networks, a suf x, such as
, must be added to host names.
mycorp.com
Remaining settings are irrelevant, as SiteCon g does not manage this device's
network.
a) In the tree-view select the placeholder device.
b) In the Device list view right-click the device and select
The Edit Device dialog box opens.
c) Edit the hostname.
d) If using DHCP, specify a domain name.
e) Click OK to save settings and close.
to save settings and close.
OK
communication.
The Remote Target Credentials dialog box opens.
.
Edit
.
Edit
on page 45
on page 35
.
Credentials
4 October 2010