Deploy Control Point Pc Software - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Upgrading K2 systems
4. If not already present in the SiteCon g system description, con gure deployment groups as
follows:

Deploy control point PC software

Use SiteCon g to upgrade control point software on the K2 control point PC. In most cases, the K2
control point PC is also the SiteCon g control point PC, so you are in effect using SiteCon g to
upgrade software on its own local system.
For this release of K2 software, the install task identi es the control point software in the Managed
Package column as follows:
GrassValleyControlPoint 7.3.8.xxxx
The software deployment process for the control point PC is similar to that used to upgrade software
on other K2 devices. Use similar procedures and adjust accordingly to do the following:
1. Add the K2 control point software package to the deployment group that contains the control
point PC.
2. Check software on the control point PC.
3. Con gure and run deployment tasks to upgrade software.
Unlock K2 Summit Production Clients
This task disables the write lter on one or more K2 Summit Production Clients.
Prerequisites for this task are as follows:
The device or all the devices in the group are communicating correctly in SiteCon g. This is
indicated by the green star icon overlay.
The device or all the devices in the group are currently locked. This is indicated by the gray lock
icon overlay.
1. If you have not already done so, stop all media access on the K2 systems. This includes record,
play, and transfer operations.
2. In either the
Groups
3. Right-click the device or the group and select
A
4. Click
The Set Administrative Credentials dialog box opens.
5. Enter a username and password with administrator level privileges on the device or devices and
click
The Unlocking Devices window opens and displays progress.
44 K2 Version 7.3.8 Release Notes & Upgrade Instructions
A deployment group that contains your SAN K2 clients
A deployment group that contains your K2 Media Servers
A deployment group that contains your control point PC
Network Configuration | Devices
tree view, identify the device or the group of devices that you intend to unlock.
may require restart
to allow SiteCon g to restart the device or devices.
Yes
.
OK
tree view or the
.
Unlock
message appears.
Software Deployment | Deployment
23 November 2010