GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual page 48

Upgrading K2 systems
1. On a K2 Media Server, using Notepad, open the media le system (SNFS) con guration le:
The con guration le can be either
D:\SNFS\config\gvfs_hostname.cfg
server (FSM).
2. On a K2 Media Server, verify, and if necessary modify, settings for required values as follows:
# *********************************************************
# A global section for defining file system-wide parameters
# *********************************************************
GlobalSuperUser Yes
.
.
.
.
.
.
InodeDeleteMax 1000
.
BufferCacheSize 64M
.
.
.
.
InodeCacheSize 32K
.
ReservedSpace No
3. Close, and if necessary save, the SNFS con guration le.
If you made changes, the K2 system must be restarted for the changes to take effect.
The restart later in this upgrade procedure is suf cient to put the changes into effect.
Configure Macintosh access in SNFS configuration file on K2 Media Servers
In this task you open the media le system (SNFS) con guration le and verify/modify settings.
Do not do this task if:
The K2 SAN has no iSCSI or Fibre Channel connected Macintosh clients
The K2 SAN has iSCSI connected or Fibre Channel connected Macintosh clients and Windows
Security is con gured to Yes on the SNFS le system.
Do this task if:
The K2 SAN has iSCSI connected or Fibre Channel connected Macintosh clients and Windows
Security is con gured to No on the SNFS le system.
Prerequisites for this task are as follows:
The Macintosh client connection requires K2 FCP Connect.
The K2 SAN must be of ine
48 K2 Version 7.3.8 Release Notes & Upgrade Instructions
D:\SNFS\config\default.cfg.
, where is the name of the primary le system
hostname
or
23 November 2010