Reset Capture Services - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Upgrading K2 systems
5. In the text of the con guration le, identify the RTIO setting and if necessary modify the value
as follows:
6. Do one of the following:

Reset Capture Services

Do not do this task if:
You do not use any of the K2 Capture Services.
78 K2 Version 7.3.8 Release Notes & Upgrade Instructions
On a K2 Summit Production Client the required RTIO value is
follows:
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 370
.
On a K2 Solo Media Server with standard Hard Disk Drives (HDD) the required RTIO value
is and is con gured as follows:
170
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 170
.
On a K2 Solo Media Server with optional Solid State Drives (SSD) or on a K2 Summit
Production Client the required RTIO value is
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 250
.
If you modi ed the con guration le, click
click . The K2 system restarts.
OK
If you did not modify the con guration le, click
prompted "...back to online mode?" click
370
and is con gured as follows:
250
and when prompted "...restarted now"
Modify
and then exit Storage Utility. When
Cancel
.
Yes
and is con gured as
23 November 2010