Table of Contents
Advertisement
Upgrading K2 systems
6. On a K2 Summit Production Client or K2 Solo Media Server, disable the write lter.
Disabling the write lter at this point keeps it disabled after the required restart. This is helpful
because it must be disabled in order to uninstall or install software, which you will be doing after
the restart.
7. Manage the required restart as follows:
Uninstall SNFS from K2 client
Do not do this task if:
The desired version of SNFS is already installed and the installation (including required restarts)
is complete.
Do this task if:
A SNFS version lower than 3.5.2.1b15620 is currently installed
If you have not already done so, disable the write lter on the K2 Summit Production Client or K2
Solo Media Server.
1. Make sure you are logged in with an administrator account.
2. Use the Windows
3. Disable the write lter.
Disabling the write lter at this point keeps it disabled after the required restart. This is helpful
because it must be disabled in order to install software, which you will be doing after the restart.
4. Restart using the Windows operating system restart procedure.
Install K2 software
Prerequisites for this task are as follows:
If you uninstalled the previous version of K2 software, you must restart the K2 client at least
once before installing the new version of K2 software.
1. Log in with a local administrator account. This is required to support K2 System Software
licensing.
NOTE: When installing K2 system software, you must be logged in with a local administrator
account. Do not install software using a domain account.
2. Disable the write lter, if not already disabled.
3. If installation les are on a connected external USB drive, copy the installation les to the local
drive before proceeding.
4. Access the installation les.
86
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Restart now.
Add/Remove Programs
control panel and uninstall SNFS.
23 November 2010
Hide quick links:
Advertisement
Table of Contents
