Upgrade K2 Dyno Controller - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

3. Click
The Locking Devices window opens and displays progress.
4. When the Locking Devices window reports that the lock process completed successfully, click
Close
The device or devices are now locked. For K2 Summit/Solo, this also enables the write lter, which
enforces the restart.

Upgrade K2 Dyno Controller

Do not do the tasks in this section if:
The K2 Summit Production Client or K2 Solo Media Server is not controlled by a K2 Dyno
Controller.
Do the tasks in this section if:
The K2 Summit Production Client or K2 Solo Media Server is controlled by a K2 Dyno Controller
and you need to upgrade software on the K2 Dyno Controller. Refer to compatibility speci cations
to determine if you need to upgrade.
Before upgrading a K2 Dyno Controller, verify the following:
You have access to the software installation les for this release. Procure the les via the
appropriate distibution method, such as download, CD-ROM, network drive, or external drive.
You have a recovery image for the K2 Dyno Contoller at the current software version.
Media access is stopped.
About K2 Dyno Replay Controller modes
The K2 Dyno Reply Controller operates in the following modes:
Dyno mode The Dyno application is open for normal operations such as capturing and replaying
highlight clips.
Maintenance mode The Dyno application is closed and the Windows operating system desktop
is available for system tasks such as network con guration and software update.
By default, the K2 Dyno Replay Controller is in the Dyno mode. You must manually put the unit
in the maintenance mode, which requires a restart. Once you are in the maintenance mode, if you
shutdown or restart, you are prompted to con rm the switch back to the Dyno mode at next startup.
You can also choose to stay in the maintenance mode at next startup.
Uninstall K2 Dyno Controller Client software
1. On the K2 Dyno Controller, switch to the maintenance mode as follows:
a) At the startup screen, press the
b) Touch
2. Use the Windows
23 November 2010
to allow SiteCon g to restart the device or devices.
Yes
.
MAINTENANCE MODE
The K2 Dyno Client software closes and the Windows OS desktop is displayed after a restart.
Add/Remove Programs
button and then touch
Shift
.
control panel and remove K2 Dyno Client software.
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Upgrading K2 systems
.
SHUTDOWN
81