Table of Contents
Advertisement
Upgrading K2 systems
For K2 Summit Production Client or K2 Solo Media Server, if you have not already done so,
disable (unlock) the write lter.
Stop all media access on K2 systems.
Shut down all applications on K2 systems.
Disable write filter
1. If you have not already done so, log on to the K2 system with Windows administrator privileges.
2. From the Windows desktop, click
FBWF Manager opens.
3. Under Filter Settings, set Filter to
Do not modify other settings.
4. Click
5. When prompted, restart the K2 system.
Upgrade QuickTime
Do not do this task if:
QuickTime is currently at version 7.6 or higher.
Do this task if:
QuickTime is at a version lower than 7.6.
1. Access the QuickTime installation les.
2. Locate and open the following QuickTime install le:
QuickTimeInstaller-7.6.exe
3. Work through the install wizard.
Con gure settings so that the software does not automatically update Quicktime and other Apple
software.
NOTE: Unless instructed to do so by Grass Valley, do not update or install Apple software.
Accept the default destination folder and other default settings.
Configure SNFS default.cfg file on stand-alone K2 system
In this task you open the media le system (SNFS) con guration le and verify/modify settings.
Do not do this task if:
You have already modi ed the con guration le with the required settings.
Do this task if:
The con guration le does not have the required settings.
Prerequisites for this task are as follows:
K2 systems must be of ine
84
K2 Version 7.3.8 Release Notes & Upgrade Instructions
.
OK
Start | All Programs | Grass Valley | Write Filter Utility
.
Disable
.
23 November 2010
Hide quick links:
Advertisement
Table of Contents
