GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual page 59

SiteCon g is able to log in to the device using the username/password credentials assigned to
the device.
The SiteCon g control point PC does not have a network drive mapped to an administrative
share (such as C$) on a device on which you are checking software.
Do the following steps on the SAN K2 clients that you are upgrading.
1. In the
group or any individual device and select
NOTE: If you have access problems, verify that the adminstrator account on the device has
credentials as currently con gured in SiteCon g. By default credentials on the device should
be administrator/adminGV! for Aurora devices and Administrator/adminK2 for K2 devices.
The Check Software dialog box appears. SiteCon g searches for software on the selected device
or devices and gathers information. Progress is reported.
2. When the check is complete for the selected device or devices, close the Check Software dialog
box.
An updated list of all currently installed software is displayed in the
| Installed Software
displayed in the Managed Package and Deployment Group columns.
Add software package to deployment group for SAN K2 clients
Prerequisites for this task are as follows:
You can access the software package le from the SiteCon g control point PC.
The SAN K2 clients to which you are deploying software are in a deployment group.
Use the following procedure to add one or more software packages to the deployment group that
contains your SAN K2 clients. For this release of K2 software, identify and add software installation
les as follows:
Software
K2 client software
SNFS software
1. In the
2. Click the
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept a EULA, the
associated software is not assigned to the deployment group.
SiteCon g adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group. SiteCon g
creates new software deployment tasks for the package and displays them in the Tasks list view.
23 November 2010
Software Deployment | Deployment Groups
list view. If software is a SiteCon g managed software package, information is
File name
GrassValleyK2SummitSANClient_7.3.8.xxxx.cab
SNFS_Summit_3.5.2.1b15620.cab
Software Deployment | Deployment Groups
button.
Add
Select from the list of packages then click
Click , browse to and select the package, then click
Browse
tree view, right-click the top-most node for the
.
Check Software
tree view, select a deployment group.
.
OK
Open
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Upgrading K2 systems
Software Deployment | Devices
.
59