Upgrade Disk Drive Firmware On Stand-Alone K2 System - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

6. Right-click the controller in the tree view and do one of the following:
7. If online, messages appear
system in of ine mode.
AppCenter channels go of ine. The Open File dialog box opens.
8. In the Open File dialog box, browse to and select the microcode le for the required version.
Refer to the following for locations and lenames:
9. Click
The Progress Report window appears showing the microcode download task and the percentage
completion.
10. If direct-connect storage and upgrading expansion chassis microcode, do the following:
a) Right-click the controller in the tree view, then select
b) In the Open File dialog box, browse to the directory and le as listed in K2 RAID compatibility
c) Click
11. When nished, exit Storage Utility.
12. If direct-connect storage, on 100% completion, proceed as follows:
13. Put AppCenter channels back online.
14. Restart.

Upgrade disk drive firmware on stand-alone K2 system

Do not do this task if:
A K2 system with disk drive rmware already at a compatible version, as listed in compatibility
speci cations.
Do this task if:
A K2 system with disk drive rmware that you need to upgrade, as listed in compatibility
speci cations.
23 November 2010
For internal storage, select
For direct-connect storage, select
For internal-storage, refer to
For direct-connect storage, refer to
OK.
in the context menu.
Microcode
speci cations earlier in these release notes.
OK.
The Progress Report window appears showing the microcode download task and the percentage
completion.
If the RAID controller chassis has redundant controllers, no power cycle is required. The
microcode download is complete.
If the RAID controller chassis does not have redundant controllers, power cycle the RAID
controller chassis.
Load Controller Microcode
Advanced | Load Controller Microcode
of ine mode now? and
Compatible K2 Summit/Solo components
Compatible K2 RAID components
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Upgrading K2 systems
in the context menu.
in the context menu.
continue? . Click
Yes
on page 31.
on page 35.
Advanced | Load Disk Enclosure
to put the K2
93