Table of Contents
Advertisement
Known Problems
Installation
CR102800
Compatibility
CR108742
PR25753
Dyno PA
CR111042
CR112249
108
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Description:
If uninstalling or installing K2 client software while applications
or connections to AppService are open, the installation program
becomes unresponsive.
Workaround:
Use Task Manager to stop AppService. To prevent the problem
from occurring, shutdown all applications and connections before
uninstalling or installing.
Description:
M-Series iVDR transfers fail.
Workaround:
Do not attempt to transfer to/from M-Series iVDR.
Description:
MXF streaming transfer to XDCAM recorder fails.
Workaround:
None. Some Sony deck models do not comply with the MXF
standard.
Description:
On a stand-alone K2 Summit/Solo con gured for K2 Dyno PA, the
V: drive is not available. This occurs if the K2 system is started
without a network connection or otherwise used outside of the Dyno
PA system.
Workaround:
Remove the DLC con guration from the K2 Summit/Solo as
instructed in Dyno PA documentation. Verify that the loopback
adapter is at the top of the adapter order list. This is required for a
stand-alone K2 system that is not part of a Dyno PA system.
Description:
On a K2 Solo Media Server or stand-alone K2 Summit Production
Client con gured for K2 Dyno PA, imports and exports fail.
Workaround:
If currently used with Dyno PA, after every installation of K2
software on the K2 Summit/Solo system, go to the Windows
Services Control Panel and con gure the Grass Valley FTP Daemon
service to Startup Type Automatic. If no longer used with Dyno
PA, remove the DLC con guration from the K2 Summit/Solo as
instructed in Dyno PA documentation and then reinstall K2 software.
23 November 2010
Hide quick links:
Advertisement
Table of Contents
