Known Problems - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Release notes & upgrade instructions
Table of Contents

Advertisement

Known Problems

The following limitations are present in this release of software. If you wish to obtain more
information about these limitations, please mention the reference numbers.
AppCenter
CR102538
CR105208
CR108294
CR109197
CR110369
CR110998
Storage Utility
CR101794
CR109691
23 November 2010
Description:
When attempting to create a sub-bin eleven levels deep, an error is
displayed.
Workaround:
Constrain nested sub-bins to ten levels deep or less.
Description:
Closed captioning and/or ancillary data not present in the last few
seconds of a growing clip's playout. This occurs when playing out
a clip that is being recorded, and the recording stops.
Workaround:
Stop playout of growing clip before stopping recording. In any case
the closed captioning and/or ancillary data is full-length in the
recorded clip and present in subsequent playout.
Description:
When recon guring channel security settings on Con guration
Manager Security tab, AppCenter does not allow username/password
elds to be blank.
Workaround:
Enter username/password for a valid user account. Once con gured,
the elds require valid information.
Description:
Recorded video is one frame late relative to timecode. This occurs
if you record using Time-of-day timecode and the source is from
channel four's LTC input.
Workaround:
Connect the house LTC input to channel 1 and use it as the
Time-of-day source.
Description:
AppCenter does not allow a clip to be deleted if the clip is associated
with a playlist, program, or subclip.
Workaround:
First use the "Consolidate Media" feature on the clip, then delete
the clip.
Description:
Video faults continue to occur if Super Slo-Mo inputs lose and then
regain phase alignment while recording is underway.
Workaround:
If inputs lose phase alignment, rst restore phase alignment and
then stop and restart the recording.
Description:
Storage Utility does not open for a nearline SAN. This occurs when
in K2 Con g you select the name of the K2 SAN, which is the top
node of the storage system tree, when attempting to open Storage
Utility.
Workaround:
In K2Con g tree view, under the nearline SAN's K2 Media Server,
select the
property page click
Description:
The Expansion by bandwidth feature is not supported on K2 SANs
with RANKs that contain multiple LUNs.
node to open its property page. On the
File System Server
Launch Storage Utility
K2 Version 7.3.8 Release Notes & Upgrade Instructions
.
106

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents