Install Required Windows Update; Upgrade Lsi Raid Controller Driver - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Upgrading K2 systems

Install required Windows update

Do not do this task if one of the following is true:
A K2 Summit Production Client or K2 Solo Media Server received new from Grass Valley with
K2 software version 7.3.x or higher pre-installed, in which case the required Windows update
is pre-installed.
Do this task if:
A K2 Summit Production Client or K2 Solo Media Server being upgraded from a version of K2
software version lower than 7.3.x.
NOTE: Do not install general Windows updates as available from Microsoft. Update only as
directed by Grass Valley.
1. Extract the contents of the
This creates a folder named
2. Within the
A command shell starts.
3. When prompted enter
For each of the updates, the shell displays a line showing the update installing. A window showing
the progress of an update opens and then closes when complete. The shell then updates with the
completion status of the update.
4. If you interrupt the Windows update process, run
continue from the point of interruption.
5. When updates complete and the shell displays the prompt Do you want to reboot now? , enter
to restart.
Y
6. Log on to the K2 system with Windows administrator privileges.
7. Delete the
8. Empty the Recycle Bin.

Upgrade LSI RAID controller driver

Do not do this task if:
A K2 Solo Media Server
A K2 Summit Production Client with direct-connect storage
A K2 Summit Production Client installed new with K2 software version 7.1.x or higher, in which
case the driver is pre-installed at version 3.10.0.32.
A K2 Summit Production Client with the driver already upgraded to version 3.10.0.32.
Do this task if:
A K2 Summit Production Client with internal storage and a driver at a version lower than
3.10.0.32.
90 K2 Version 7.3.8 Release Notes & Upgrade Instructions
RunUpdates.zip
RunUpdates
folder run
RunUpdates RunUpdates.exe
to start the update process
Y
folder and les.
RunUpdates
le into the
C:\Temp
that includes all of the Windows update les.
.
RunUpdates.exe
directory.
to start it again. Updates
23 November 2010