GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual page 17

6. Click
The Export Rule dialog box opens.
7. Con gure as follows:
8. Click
9. Repeat previous steps to add additional Export HotBins.
10. When your capture service settings are complete, click
A message appears that informs you about the write lter and prompts you to restart.
11. Click
The K2 system restarts.
23 November 2010
.
Add
Source K2 Bin Name
V: drive. It must be in the K2 media database and appears in AppCenter as a media bin. When
valid clips are placed in this bin, the HotBin Export capture service automatically exports the
clips.
Include Sub-Bins Optional. When selected, clips are exported if they are in a bin nested
inside the Source K2 Bin.
Rule Do not con gure this eld. Leave the default value as it is.
Destination Folder Path
les/directories exported by the Export capture service. If you specify a destination folder
that does not yet exist, the K2 system creates it when exporting. If the destination folder is
not on the local K2 system, you are prompted to enter user account credentials to access the
source directory. If part of a domain, enter the domain name.
NOTE: You must use the same user account for all capture service access to all systems.
File Type Required. Select the le format in which K2 clips are exported.
Option Do not con gure this eld. Leave the default value as it is.
to save settings and close the Export Rule dialog box.
OK
.
OK
Required. This is the watched bin. The bin must be on the K2 system s
Required. This is a standard le system directory. It receives the
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Additional notes
.
Apply
17