GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual page 50

Upgrading K2 systems
4. Double-click
The le resets registry entries in preparation for moving SNFS from C: to D:.
5. When prompted "Are you sure...", answer
6. When a message con rms the registry change, dismiss the message.
7. Restart the K2 Media Server.
Check all currently installed software on K2 Media Servers
Prerequisites for this task are as follows:
The device is assigned in the SiteCon g system description and network connectivity is present.
SiteCon g is able to log in to the device using the username/password credentials assigned to
the device.
The SiteCon g control point PC does not have a network drive mapped to an administrative
share (such as C$) on a device on which you are checking software.
Do the following steps on the K2 Media Servers that you are upgrading.
1. In the
group or any individual device and select
NOTE: If you have access problems, verify that the adminstrator account on the device has
credentials as currently con gured in SiteCon g. By default credentials on the device should
be administrator/adminGV! for Aurora devices and Administrator/adminK2 for K2 devices.
The Check Software dialog box appears. SiteCon g searches for software on the selected device
or devices and gathers information. Progress is reported.
2. When the check is complete for the selected device or devices, close the Check Software dialog
box.
An updated list of all currently installed software is displayed in the
| Installed Software
displayed in the Managed Package and Deployment Group columns.
Add software package to deployment group for K2 Media Servers
Prerequisites for this task are as follows:
You can access the software package le from the SiteCon g control point PC.
The K2 Media Servers to which you are deploying software are in a deployment group.
Use the following procedure to add one or more software packages to the deployment group that
contains your K2 Media Servers. For this release of K2 software, identify and add software installation
les as follows:
Software
K2 Server software
for 32-bit systems
K2 Server software
for 64-bit systems
SNFS software for
32-bit systems
50 K2 Version 7.3.8 Release Notes & Upgrade Instructions
to run the le.
35c235d.reg
Software Deployment | Deployment Groups
list view. If software is a SiteCon g managed software package, information is
File name
GrassValleyK2Server_x86_7.3.8.xxxx.cab
GrassValleyK2Server_x64_7.3.8.xxxx.cab
SNFS_x86_3.5.2.1b15620.cab
.
Yes
tree view, right-click the top-most node for the
.
Check Software
Software Deployment | Devices
23 November 2010