Table of Contents
Advertisement
Upgrading K2 systems
3. If not already present in the SiteCon g system description, con gure deployment groups as
follows:
Check all currently installed software on stand-alone K2 systems
Prerequisites for this task are as follows:
The device is assigned in the SiteCon g system description and network connectivity is present.
SiteCon g is able to log in to the device using the username/password credentials assigned to
the device.
The SiteCon g control point PC does not have a network drive mapped to an administrative
share (such as C$) on a device on which you are checking software.
Do the following steps on the stand-alone K2 systems that you are upgrading.
1. In the
group or any individual device and select
NOTE: If you have access problems, verify that the adminstrator account on the device has
credentials as currently con gured in SiteCon g. By default credentials on the device should
be administrator/adminGV! for Aurora devices and Administrator/adminK2 for K2 devices.
The Check Software dialog box appears. SiteCon g searches for software on the selected device
or devices and gathers information. Progress is reported.
2. When the check is complete for the selected device or devices, close the Check Software dialog
box.
An updated list of all currently installed software is displayed in the
| Installed Software
displayed in the Managed Package and Deployment Group columns.
Add software package to deployment group for stand-alone K2 systems
Prerequisites for this task are as follows:
You can access the software package le or les from the SiteCon g control point PC.
The stand-alone K2 systems to which you are deploying software are in a deployment group.
Use the following procedure to add one or more software packages to the deployment group that
contains your stand-alone K2 systems. For this release of K2 software, identify and add software
installation les as follows:
Software
K2 Client
software
SNFS software
1. In the
68
K2 Version 7.3.8 Release Notes & Upgrade Instructions
A deployment group that contains your stand-alone K2 systems
A deployment group that contains your control point PC
Software Deployment | Deployment Groups
list view. If software is a SiteCon g managed software package, information is
File name
GrassValleyK2SummitStandalone_7.3.8.xxxx .cab
SNFS_Summit_3.5.2.1b15620.cab
Software Deployment | Deployment Groups
tree view, right-click the top-most node for the
.
Check Software
Software Deployment | Devices
tree view, select a deployment group.
23 November 2010
Hide quick links:
Advertisement
Table of Contents
