Install Mpeg-2/Avc-Intra Field Kit - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Upgrading K2 systems
Uninstall K2 Dyno Controller Client software
1. On the K2 Dyno Controller, switch to the maintenance mode as follows:
a) At the startup screen, press the
b) Touch
2. Use the Windows
Install software on K2 Dyno Controller
Before you install K2 Dyno Client software you must rst uninstall the current version.
1. Copy the directory that contains the K2 Dyno Client software onto a portable USB drive, such
as a Flash drive.
2. Connect the USB drive to the K2 Dyno Controller and copy the Client directory to the K2 Dyno
Controller desktop.
3. In the Client directory, locate and open the following le:
setup.exe
4. Follow the onscreen instructions, and work through each page.
5. Click
6. Remove the portable USB drive, if it is still connected.
7. Restart using standard Windows procedures.
8. When prompted "...back to K2 Dyno mode...?", click
The K2 Dyno Controller restarts.

Install MPEG-2/AVC-Intra field kit

If you are installing an MPEG-2 or AVC-Intra eld kit upgrade on one or more or your K2
Summit Production Clients or K2 Solo Media Servers, do so now. Follow the procedure in the
Field Kit Upgrade Instructions document that you received with the eld kit.
100 K2 Version 7.3.8 Release Notes & Upgrade Instructions
MAINTENANCE MODE
The K2 Dyno Client software closes and the Windows OS desktop is displayed after a restart.
Add/Remove Programs
If this is the rst install after a re-image, enter the K2 Dyno Replay Controller serial number
when prompted.
If the K2 Dyno System Con guration Tool opens, do not enter any information. Remove any
text from the serial number eld, as it must be blank. Then click
"...number is empty. Continue?", click
If prompted "...update to new rmware?" click
Controller Firmware Updater, and when a Success message displays, click
and to complete the installation.
Next Close
button and then touch
Shift
.
control panel and remove K2 Dyno Client software.
.
OK
, observe progress on the K2 Dyno
Yes
Yes
.
SHUTDOWN
and when prompted
OK
.
OK
.
23 November 2010