Upgrade Lsi Raid Controller Driver; Upgrade Megaraid Storage Manager - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

Upgrade LSI RAID controller driver

Do not do this task if:
A K2 Solo Media Server
A K2 Summit Production Client with direct-connect storage
A K2 Summit Production Client installed new with K2 software version 7.1.x or higher, in which
case the driver is pre-installed at version 3.10.0.32.
A K2 Summit Production Client with the driver already upgraded to version 3.10.0.32.
Do this task if:
A K2 Summit Production Client with internal storage and a driver at a version lower than
3.10.0.32.
1. If you are not sure of the driver version currently installed, do the following:
a) open Windows
b) Check le properties. The following properties indicate that version 3.10.0.32 is already
c) If the upgrade is necessary, continue with this procedure.
2. Open Windows
3. Right-click
An install wizard opens.
4. Select
5. Select
6. Select
7. Click
8. Click
9. Click
10. When prompted regarding Windows Logo Compatibility, select
Finish
11. Restart as prompted.

Upgrade MegaRAID Storage Manager

Do not do this task if:
A K2 Solo Media Server
A K2 Summit Production Client with direct-connect storage
A K2 Summit Production Client installed new with K2 software version 7.1.x or higher, in which
case MegaRAID Storage Manager is pre-installed at version 2.91-05.
23 November 2010
Device Manager | SCSI and RAID controllers | LSI MegaRAID SAS PCI Express
ROMB | Properties | Driver
installed:
Version
3.10.0.32
Device Manager | SCSI and RAID controllers
LSI MegaRAID SAS PCI Express ROMB
and click
No, not this time
Install from a list or specific location [Advanced]
Don't search. I will choose the driver to install
.
Have disk
, navigate to the
Browse
.
Next
.
.
Date
7/22/2009
and select
.
Next
and click
directory, select
LSI_1078_winxp
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Upgrading K2 systems
.
.
Update driver
and click .
Next
.
Next
oemsetup.inf
Continue Anyway
, and click
OK.
and click
73