GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual page 60

Upgrading K2 systems
Upgrade software on SAN K2 clients
Prerequisites for this task are as follows:
The devices that you are upgrading are in a deployment group.
For the software you are upgrading, you have added a newer version of that managed software
package to the deployment group.
You have recently done the SiteCon g "Check Software" operation on the devices you are
upgrading.
For the K2 Summit Production Client, the write lter is disabled (unlocked).
NOTE: On a K2 system, if a SNFS version lower than 3.0 is installed, do not uninstall using
SiteCon g. You must manually uninstall using a special batch le. Follow instructions in the
release notes for your current version of K2 software.
If you are upgrading multiple software components for which there is a required sequence, you must
check and uncheck tasks and run multiple deployment sessions to control the sequence. For some
software components, SiteCon g aids you by enforcing dependencies. For each individual software
component, SiteCon g enforces an uninstall of the current version of software before installing the
upgrade version. SiteCon g provides uninstall deployment tasks and install deployment tasks to
indicate the task ow. SiteCon g can do the uninstall/install in a single deployment session.
1. In the
devices to which you are deploying software.
The corresponding software deployment tasks are displayed in the Tasks list view.
2. For the software you are deploying, select the
3. For the software you are installing, select the
For upgrading SAN K2 clients to this release, con gure
Deploy
Also, when upgrading SNFS, con gure deployment tasks to upgrade (uninstall/install) SNFS.
Deploy the following tasks at the same time:
Deploy
NOTE: If there are dependencies, SiteCon g can enforce that some tasks be deployed together.
60 K2 Version 7.3.8 Release Notes & Upgrade Instructions
Software Deployment | Deployment Groups
Managed Package
GrassValleyK2SummitSANClient
xxxx.xxxx
GrassValleyK2SummitSANClient
7.3.8.xxxx
WFRegMon_SummitSANClient x.x.x
Managed Package
SNFS Summit xxxxxx
SNFS Summit 3.5.2.1b15620
tree view, select the device or the group of
check box in the row for the uninstall task.
Deploy
check box in the row for the install task.
Deploy
check boxes as follows:
Deploy
Action
Uninstall
Install
Install (there is no uninstall task for this
software)
Action
Uninstall
Install
23 November 2010