Unlock K2 Summit Production Clients Or K2 Solo Media Servers; Upgrade Software On Stand-Alone K2 Systems - GRASS VALLEY K2 7.3.8 - RELEASE NOTES AND Quick Start Manual

2. Click the
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept a EULA, the
associated software is not assigned to the deployment group.
SiteCon g adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group. SiteCon g
creates new software deployment tasks for the package and displays them in the Tasks list view.

Unlock K2 Summit Production Clients or K2 Solo Media Servers

This task disables the write lter on one or more K2 Summit Production Clients or K2 Solo Media
Servers.
Prerequisites for this task are as follows:
The device or all the devices in the group are communicating correctly in SiteCon g. This is
indicated by the green star icon overlay.
The device or all the devices in the group are currently locked. This is indicated by the gray lock
icon overlay.
1. If you have not already done so, stop all media access on the K2 systems. This includes record,
play, and transfer operations.
2. In either the
Groups
3. Right-click the device or the group and select
A
4. Click
The Set Administrative Credentials dialog box opens.
5. Enter a username and password with administrator level privileges on the device or devices and
click
The Unlocking Devices window opens and displays progress.
6. When the Unlocking Devices window reports that the unlock process completed successfully,
click
The device or devices are now unlocked. For K2 Summit Production Clients, this also disables the
write lter, which enforces a restart.

Upgrade software on stand-alone K2 systems

Prerequisites for this task are as follows:
The devices that you are upgrading are in a deployment group.
23 November 2010
button.
Add
Select from the list of packages then click
Click , browse to and select the package, then click
Browse
Network Configuration | Devices
tree view, identify the device or the group of devices that you intend to unlock.
may require restart
to allow SiteCon g to restart the device or devices.
Yes
.
OK
.
Close
.
OK
tree view or the
.
Unlock
message appears.
K2 Version 7.3.8 Release Notes & Upgrade Instructions
Upgrading K2 systems
.
Open
Software Deployment | Deployment
69