System Information Menu - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 6 Information Menu options
Command
port
geaport
sfp
ufd
dump

System Information Menu

Command: /info/sys
[System Menu]
The following table describes the System Information Menu options.
Table 7 System Information Menu options
Command
snmpv3
general
Usage
Displays port status information, including:
Port number
Whether the port uses VLAN tagging or not
Port VLAN ID (PVID)
Port name
VLAN membership
Displays GEA port mapping information, used by service personnel.
Displays the status of the Small Form Pluggable (SFP) module on each Fiber External
Port.
Displays Uplink Failure Detection information.
Dumps all switch information available from the Information Menu (10K or more,
depending on your configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
snmpv3 - SNMPv3 Information Menu
general - Show general system information
log - Show last 100 syslog messages
user - Show current user status
dump - Dump all system information
Usage
Displays the SNMP v3 Menu.
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
Time of last boot
MAC address of the switch management processor
IP address of IP interface #1
Hardware version and part number
Software image file and version number
Configuration name
Log-in banner, if one is configured
Information Menu
26