HEIDENHAIN ITNC 530 - CONVERSATIONAL PROGRAMMING User Manual page 6

TNC Model, Software and Features
This manual describes functions and features provided by TNCs as of
the following NC software numbers.
TNC model
iTNC 530
iTNC 530 E
iTNC 530
iTNC 530 E
iTNC 530 programming station
The suffix E indicates the export version of the TNC. The export
version of the TNC has the following limitations:
Simultaneous linear movement in up to 4 axes
The machine tool builder adapts the usable features of the TNC to his
machine by setting machine parameters. Some of the functions
described in this manual may therefore not be among the features
provided by the TNC on your machine tool.
TNC functions that may not be available on your machine include:
Tool measurement with the TT
Please contact your machine tool builder to become familiar with the
features of your machine.
6
NC software number
340 490-06
340 491-06
340 492-06
340 493-06
340 494-06