Custom Switch) - Yaesu FTDX9000D - DATA MANAGEMENT Operation Manual

An often-used Menu mode selection may be brought out to the front panel's [ C.S ] key
C.S Setup
1. Press the [ MNU ] key to engage the Menu mode; the
Menu list will appear on the TFT.
2. Rotate the Main tuning dial to select the Menu item
you want to be able to access via the [ C.S ] key.
3. Press and hold in the [ C.S ] key for two seconds to
lock in your selection.
4. Press and hold in the [ MNU ] key for two seconds to
save the new configuration and exit to normal opera-
tion.
FT 9000D O
DX PERATION
C.S ( C
USTOM
[ C.S ] key [ Main Tuning Dial ] knob
M
ANUAL
C
ONVENIENT
)
S
WITCH
[ CLAR/VFO-B ] knob
Menu Selection Recall via [ C.S ] Switch
Press the [ C.S ] switch.
On the TFT, the programmed Menu item will appear. You
may now rotate the [ CLAR/VFO-B ] knob to change the
setting of this menu item. Press the [ MNU ] key for two
seconds, when you are done, to save the new configura-
tion and exit to normal operation.
F
EATURES
[ MNU ] key
Page 57