Band Stack Operation; Custom Switch) - Yaesu FTdx5000MP Operating Manual

Hf/50 mhz transceiver
Table of Contents

Advertisement

The FT
5000 utilizes a triple band-stack VFO selection technique that permits you to store up to three favorite frequen-
DX
cies and modes onto each band's VFO register. For example, you may store one frequency each on 14 MHz CW, RTTY, and
USB, then recall each VFO by successive, momentary presses of the [ 14 ] MHz band button. Each Amateur band key may
similarly have up to three frequency/mode settings applied. Both the VFO-A and VFO-B systems have their own, indepen-
dent, band stacks.
A typical setup, for the 14 MHz band, might be arranged
like this:
1. Program 14.025 MHz, CW Mode, then press the [ 14 ]
MHz band button;
2. Program 14.080 MHz, RTTY Mode, then press the [ 14 ]
MHz band button;
3. Program 14.195 MHz, SSB Mode, then press the [ 14 ]
MHz band button.
With this configuration, successive momentary presses of
the [ 14 ] MHz band button will allow you to toggle se-
quentially through these three VFO configurations.
An often-used Menu mode selection may be programmed to the front panel [ C.S ] button.
C.S Setup
1. Press the [ MENU ] button to engage the Menu mode;
the Menu list will appear on the SUB DISPLAY win-
dows.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the
Menu item you want to be able to access via the [ C.S ]
button.
3. Press and hold in the [ C.S ] button for two seconds to
lock in your selection.
4. Press and hold in the [ MENU ] button for two seconds
to save the new configuration and exit to normal op-
eration.
Menu Selection Recall via [C.S] button
1. Press the [ C.S ] button. The programmed Menu item
will appear on the display.
2. You may now rotate the ( VFO-B )[ SELECT ] knob to
change the setting of this menu item.
3. Press the [ MENU ] button for two seconds, when you
are done, to save the new configuration and exit to
normal operation.
FT
5000 O
DX
PERATING
C
B
S
AND
TACK
C.S C
USTOM
M
ANUAL
ONVENIENCE
O
PERATION
S
WITCH
F
EATURES
[ BAND ] Button
RTTY
CW
( VFO-A )[ SELECT ] Knob
[ C.S ] Button
[ MENU ] Button
[ C.S ] Button
[ MENU ] Button
( VFO-B )[ SELECT ] Knob
Page 47
USB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftdx5000Ftdx5000dFtdx5000 series

Table of Contents