50/200 Combi C Transducer - Simrad ES70 - INSTALLATION REV A Installation Manual

Simrad ES70

50/200 Combi C transducer

This is the termination of the transducer cable from the
The transducer cable is terminated in a Mini-Con-X connector manufactured by Conxall
(www.conxall.com). The other end of the cable is permanently fixed to the transducer.
If you need to splice the transducer cable, it is very important to use the correct cable,
and to avoid ground loops. We strongly recommend the use of a junction box. We also
recommend that you install the transducer cable in a steel conduit.
For more information, see:
• Transducer cable splicing on page 142
• Steel conduit on page 142
• GPT Transducer plug connection on page 107
74
Simrad 50/200 Combi C
transducer.
343522/A