Simrad ES70 - INSTALLATION REV A Installation Manual page 85

6 Sett the transducer(s) to None, and click
7 Click
Change IP Address
Note
If you have two Ethernet cables connected to your computer, you may need to
disconnect the Ethernet cable to the ship's network before the
is available.
8 Enter a new IP address
Tip
Change only the last digit in the IP address.
If you do have a keyboard connected to your ES70 system, click the
button at the bottom of the dialog to open an on-screen keyboard.
9 Click to save the current settings and close the dialog.
OK
10 In the
Transceiver Installation
transceiver has changed.
11 Install the transducers for the channel with the new IP address.
Note
Make sure that you choose the correct transducer(s)!
12 Click to save the current settings and close the dialog.
OK
343522/A
Apply
to open the
IP Address
dialog, observe that the IP address for the chosen
Connecting the transceiver
.
dialog.
Change IP Address
Keyboard
83