Dbt Depth Below Transducer; Dpt Depth - Simrad ES70 - INSTALLATION REV A Installation Manual

Simrad ES70
Format
$--DBS,x.x,f,y.y,M,z.z,F*hh<CR><LF>
Format description
1 = talker identifier
– –
2 = telegram identifier
DBS
3 = depth below surface in feet
x.x,f
4 = depth below surface in meters
y.y,M
= depth below surface in fathoms
5
z.z,F
Related topics
• How to set up the Simrad ITI Trawl system interface on page 87
• How to set up the Simrad PI Catch monitoring system interface on page 88
• How to set up the depth output on page 93

DBT Depth below transducer

This telegram provides the water depth referenced to the transducer.
Format
$--DBT,x.x,f,y.y,M,z.z,F*hh<CR><LF>
Format description
1 = talker identifier
– –
2 = telegram identifier
DBT
3 = water depth in feet
x.x,f
4 = water depth in meters
y.y,M
5 = water depth in fathoms
z.z,F

DPT Depth

This telegram contains water depth relative to the transducer and offset of the measuring
transducer. Positive offset numbers provide the distance from the transducer to the
water line. Negative offset numbers provide the distance from the transducer to the
part of the keel of interest.
For additional details, refer to the NMEA standard.
Format
$--DPT,x.x,y.y,z.z*hh<CR><LF>
Format description
= talker identifier
1
– –
162
343522/A