List Of Cables - Simrad ES70 - INSTALLATION REV A Installation Manual

List of cables

The list below specifies each cable used on the echo sounder system. References are
made to the location of connector(s), detailed cable drawings and specifications. The
cables are listed in numerical order.
ES70 Cable list
C1
EK60/C01 Keyboard
This is a standard keyboard cable, and it is usually fixed to the keyboard. The
connection normally depends on the make and model of the computer. Most
recent computers use a USB plug, older types use PS/2.
Note that the keyboard is an optional item. it is not a part of the ES70 delivery.
C2
EK60/C02 Mouse, trackball or other pointing device
This is a standard computer mouse or other pointing device cable. It is physically
attached to the mouse.
C3
EK60/C03 Display cable
This cable is normally provided with the display. It is a standard commercial
cable. Two types may be used, depending on the video output on the computer.
• VGA/SVGA Display on page 51
• DVI–I Display on page 54
C4
EK60/C04 Printer
A printer can be connected to the computer. A cable for this is normally provided
with the printer. The most common interface formats are parallel and USB.
• USB on page 52
• Parallel printer on page 53
C5
EK60/C05 Computer to AC mains
This cable is provided with the computer. It is normally a standard mains supply
cable.
• AC mains (IEC 60320) on page 48
C6
EK60/C06 Colour display to AC mains
This cable is provided with the colour display. It is normally a standard
commercial mains cable.
• AC mains (IEC 60320) on page 48
C7
EK60/C07 Colour display to ground
When applicable, this cable must be provided by the installation shipyard. It is
a standard commercial ground cable.
• Vessel ground on page 46
343522/A
ES70 Cable layout
31