Gpt Trigger / Synchronisation - Simrad ES70 - INSTALLATION REV A Installation Manual
Fish finding echo sounder
Hide thumbs
Also See for ES70 - INSTALLATION REV A:
- Operator's manual (96 pages) ,
- Reference manual (226 pages)
Table of Contents
Advertisement
Simrad ES70
GPT trigger / synchronisation
This cable is used to connect the General Purpose Transceiver (GPT) to an external
system for synchronisation purposes. It connects to the 25–pin D-sub connector on
the front side of the GPT.
Cable specifications
• Conductors: 2 x 2 x 0.22 mm²
• Screen: Braided pairs and overall braided
• Voltage: 60 V
• Maximum diameter: Defined by the plugs
58
343522/A
Advertisement
Table of Contents
