Cable Drawings - Simrad ES70 - INSTALLATION REV A Installation Manual

Simrad ES70

Cable drawings

This chapter provides details cable drawings offering cable specifications and termination
information.
Cable specification drawings
• Generic RS-232 Serial line on page 41
• Generic RS-232 Serial line on page 42
• RS-232 as external trigger on page 43
• Sonar synchronisation on page 44
• Commercial power supply on page 45
• Vessel ground on page 46
• GPT external power on page 47
• AC mains (IEC 60320) on page 48
• RJ45 Ethernet, straight on page 49
• RJ45 Ethernet, crossover on page 50
• VGA/SVGA Display on page 51
• USB on page 52
• Parallel printer on page 53
• DVI–I Display on page 54
• Serial line adapter on page 55
• GPT remote on/off on page 56
• GPT trigger / synchronisation on
page 58
40
• GPT battery on page 59
• ITI serial line on page 60
• PI44/54 serial line on page 61
• PI30/32 serial line on page 62
• Sonar serial line on page 63
• Single beam/normal power transducer
on page 64
• Single beam/high power transducer on
page 65
• Dual beam (wide or narrow) transducer
on page 66
• Split beam transducer on page 67
• Split beam transducer to single beam
transceiver on page 68
• Dual frequency, single beam transducer
on page 69
• ES38–10 transducer on page 70
• Single beam transducer to split beam
transceiver on page 71
• 12-16/60 transducer on page 72
• Deep water, split beam transducer on
page 73
• 50/200 Combi C transducer on page 74
• 38/200 Combi C transducer on page 75
343522/A