Simrad ES70 - INSTALLATION REV A Installation Manual page 150

Simrad ES70
Note
In the case of tapping through holes it is important that the profile of the
threads is in the correct direction compared with the entering direction of the bolt.
Use gauges. Note that the gauge must be used in the correct direction.
Emuge self-lock
Self-lock taps provided by Simrad
The following self-lock taps are on stock at Simrad, and can be ordered from us.
Threads
M6
M8
M10
M12
M16
Supplier and manufacturer
Norwegian supplier is:
Tingstad AS, P.O.Box 83, Kalbakken, 0902 Oslo, Norway
http://www.tingstad.no
Manufacturer is:
EMUGE-Werk Richard Glimpel, Nurnberger Strasse 96-100, D-90607 Lauf, Germany
http://www.emuge.de
148
Drill diameter for threads
ø5.2
ø7.0
ø8.8
ø10.7
ø14.5
Emuge self-lock
Part.no
700-078838
700-078531
700-078408
700-078409
700-078410
343522/A