ES70 Cable layout
Generic RS-232 Serial line
This cable holds a multi purpose serial line. It provides interface with any peripheral
unit. One end of the cable connects to the local unit (DTE) with a 9-pin D-connector,
while the other connects to the peripheral (DCE) as described in the peripheral unit's
documentation. Note that this cable does not support all the signals in the standard
RS-232 specification.
Cable specifications
• Conductors: 2 x 2 x 0.5 mm²
• Screen: Screened twisted pairs and overall braided
• Voltage: 60 V
• Maximum diameter: Limited by the plugs
41
343522/A