Dvi-I Display - Simrad ES70 - INSTALLATION REV A Installation Manual

Simrad ES70
DVI–I Display
This cable is a standard DVI-I cable. It is normally provided with the colour display.
For more information about the DVI signals, see http://en.wikipedia.org.
Pin Signal
1
TMDS Data 2- (Digital red - (Link 1))
2 TMDS Data 2+ (Digital red + (Link 1))
3 TMDS Data 2/4 shield
4
TMDS Data 4- (Digital green - (Link 2))
5
TMDS Data 4+ (Digital green + (Link 2))
6 DDC clock
7
DDC data
8 Analog vertical sync
9 TMDS Data 1- (Digital green - (Link 1))
10
TMDS Data 1+ (Digital green + (Link 1))
11 TMDS Data 1/3 shield
12 TMDS Data 3- (Digital blue - (Link 2))
13
TMDS Data 3+ (Digital blue + (Link 2))
14 +5 Vdc (Power for monitor when in
standby)
TMDS = Transition Minimized Differential
Signaling
54
Pin Signal
15
Ground (Return for pin 14 and analog sync)
16 Hot plug detect
17 TMDS data 0- (Digital blue - (Link 1) and
digital sync)
18
TMDS data 0+ (Digital blue + (Link 1) and
digital sync)
19 TMDS data 0/5 shield
20 TMDS data 5- (Digital red - (Link 2))
21
TMDS data 5+ (Digital red + (Link 2))
22 TMDS clock shield
23 TMDS clock+ (Digital clock + (Links 1
and 2))
24
TMDS clock- (Digital clock - (Links 1 and
2))
C1 Analog red
C2 Analog green
C3
Analog blue
C4 Analog horizontal sync
C5 Analog ground (Return for R, G and B
signals)
343522/A