Colour Display; Software; Printer; General Purpose Transceiver (Gpt) Installation - Simrad ES70 - INSTALLATION REV A Installation Manual

Simrad ES70
•
Interfaces:
– One Ethernet interface to communicate with the transceiver
– One Ethernet interface to communicate with ship's local area network (if required)
– One or more serial line interfaces (depends on how many interfaces that are
required for the specific integration)
•
Display resolution:

Colour display

A colour display monitor can be provided with the echo sounder system. Any
commercial display can also be used.

Software

All echo sounder configurations run identical software. The software automatically
adapts to the number and type of installed transceivers during power-on. Upon delivery,
the software is installed on the computer, as well as supplied on a CD-ROM. Software
updates are distributed on a CD-ROM.

Printer

A printer can be supplied, or purchased locally. Most standard off-the-shelf colour
printers can be used. A standard Windows driver is required, this is normally supplied
with the printer.
General Purpose Transceiver (GPT)
installation
The General Purpose Transceiver (GPT) is a small self-contained unit containing its
own power supply. It operates on +12 Vdc or 115-230 Vac. The unit can in principle be
mounted anywhere on board the ship, provided that the location is dry and ventilated.
Make sure that ample space is provided in front of the unit to allow for maintenance and
parts replacements. Power cable and mounting brackets are enclosed. We recommend
that the GPT is mounted as close to the transducer(s) as possible.
6. This is the minimum resolution. As with all other Windows applications, the ES70 software will work
with higher resolutions, provided that it is supported by the graphic adapter in the computer and the
display connected.
22
1280 x 1024
[6]
343522/A