Simrad ES70 - INSTALLATION REV A Installation Manual page 112

Simrad ES70
Physical and environmental specifications
•
Connectors:
– Transducer: 12-pin female Amphenol, Shell MS3102A-24, Insert 24-19S
– AUI: 15-pin female Delta (see below)
– Network: 8-pin RJ-45 socket
– Auxiliary: 25-pin female Delta
•
AUI Connector:
– Analog input for heave, roll and pitch
– Digital trigger in/out
– Alarm output
– +12 Vdc output (maximum 100 mA)
– –12 Vdc output (maximum 100 mA)
– +5 Vdc output (maximum 200 mA)
•
Physical dimensions:
– Width: 284 mm
– Height: 112 mm
– Depth: 246 mm
– See also: GPT Outline dimensions on page 102
• :
Weight
– With one transmitter board: 2.7 kg
– With two transmitter boards: 3.3 kg
– With three transmitter boards: 4.5 kg
•
Standard supply power:
– AC operation: 95 to 265 Vac, 50-60 Hz, 50-100 W
– DC operation: 11 to 15 Vdc, 50-100 W
•
External power supply for specific configurations:
– AC input: 230 Vac, 50–60 Hz
– DC output: 13.2 Vdc, 10 A
– Physical size (excluding mounting brackets) (WDH): 110 x 190 x 54 mm
– See also: GPT Power supply outline dimensions on page 104
•
Fuses:
– AC fuse: Ø5x20 mm, 2 A slow
– DC fuse: Ø5x20 mm, 10 A slow or fast
•
Operational temperature:
•
Storage temperature:
• 5 to 95% relative non-condensing
Humidity:
110
0 to +55°C
-40 to +70°C
343522/A