Installation procedures
This chapter provides the basic information required to install the physical units.
Note
Physical installation of commercial units (computers, printers, displays) is not described
in this manual. Refer to the applicable user manual(s) provided with the product.
Topics
•
Basic procedure on page 17
•
Configuration on page 18
•
General Purpose Transceiver (GPT) installation on page 22
•
ES70 Marine Computer installation on page 24
•
Colour display on page 24
Related topics
•
General safety rules on page 176
•
Equipment handling on page 177
•
Basic cable requirements on page 187
Basic procedure
This is the basic installation procedure.
1
Check that you have received all parts required for the installation; cables,
connectors, brackets etc.
2
Install the transducer(s) and the transducer cables according to the guidelines in this
manual and the drawings provided with the transducer.
Mount the ES70 Processor Unit (or commercial computer) and the display using
3
the appropriate brackets.
4
Connect the computer and display cables:
• Power cable to display monitor.
• Power cable to computer.
343522/A
Installation procedures
17