Table of Contents
Advertisement
3.2 Installation of Drive Unit - Steering Cable &
Spent Cable Tube
20222683 / A
Cable Length Definition
Example of steering cable length calculation:
Add 'A' + 'B' dimensions and subtract 4" for a 90 degree
bend. Round UP result to nearest full foot size.
For steering cable x length in feet or meter order 21120076
and add x m (ft)
Step 1 - Install Drive Unit
1. Remove 2 x lock bolts, nuts and washers
from ports and retain.
2. Position drive unit in final location. Verify
position by simulating the steering cable
connection whilst steering cable is NOT
connected.
3. Transfer bolt pattern from the drive base plate
(4 x 7 mm (0.28") diameter holes) into
mounting structure.
4. Remove drive unit and prepare holes in
mounting structure to receive mounting
fasteners (screws, bolts). Note that this
CABLE LENGTH
MID STROKE
Installation
7
Advertisement
Table of Contents
