Securing The Cables; Interconnecting Instruments - Simrad IS80 Manual

Securing the cables

Use the eclosed tie wrap to secure the cables to the
instrument.

Interconnecting instruments

Interconnect a series of instruments by using a SimNet
power cable with termination and T-joiners as illustrated
below.
Instrument
Supply
SimNet
Supply
(Red disk)

If the instruments are connected to other SimNet
compatible products, refer to the manual for those
products.
Use only 12V as SimNet supply!
12-24V
12V
SimNet
T-joiner
SimNet SimNet
T-joiner T-joiner
Installation | 9