Adjusting The Placement Of The Cisco Unified Ip Phone; Adjusting Cisco Unified Ip Phone Placement On The Desktop; Securing The Phone With A Cable Lock - Cisco CP-7942G Software Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Note
In the Firmware Load Information section, there are two fields that specify the firmware load for
Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Click the Save icon.
Step 7
A message displays asking you to reset the phone for the changes to take effect. Click OK.
Click Reset for the changes to take effect.
Step 8
Refer users to their Cisco Unified CM User Options web pages, so they can configure speed-dial buttons
Note
and program buttons to access phone services on the Cisco Unified IP Phone Expansion Module. See the
"How Users Subscribe to Services and Configure Phone Features" section on page A-3
Related Topic
•

Adjusting the Placement of the Cisco Unified IP Phone

The Cisco Unified IP Phone includes an adjustable footstand. When placing the phone on a desktop
surface, you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60
degrees. You can also mount these phones to the wall by using the footstand or by using the optional
locking wall mount kit.

Adjusting Cisco Unified IP Phone Placement on the Desktop

You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to the height that provides
optimum viewing of the phone screen. See
Procedure
Push in the footstand adjustment button.
Step 1
Adjust the footstand to desired height.
Step 2

Securing the Phone with a Cable Lock

You can secure the Cisco Unified IP Phone 7962G and 7942G to a desktop by using a laptop cable lock.
The lock connects to the security slot on the back of the phone, and the cable can be secured to a desktop.
OL-15483-01
If the phone uses the SCCP protocol, you can configure a maximum of 42 lines on your phone.
For example, if you configure two 24-line Cisco Unified IP Phone Expansion Modules, you will
have a total of 56 lines (48 lines from the modules in addition to the 8 lines on the phone).
However, only the first 42 lines will be available for use.
Configuring Softkey Templates, page 5-17
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
Adjusting the Placement of the Cisco Unified IP Phone
Figure 3-3 for more information.
for more details.
3-9